power entry modules without line filter dc www.schurter.com/pg0 5 connectors iec appliance inlet c14 with line switch 1- or 2-pole c14 70 c description - panel mount: screw-on version from front or rear side, snap-in version from front side - 2 functions: appliance inlet protection class i, line switch 1- or 2-pole - quick connect terminals 4.8 x 0.8 mm - alternative: version with line filter dc1 2 - substitute for type keb 1 ; keb 2 meets the glow wire test acc. iec60335-1 edition 4 approvals - vde license number: 40007009 - ul license number: e96454 characteristics - ultra-compact design - all single elements are already wired unwired versions available on request - line switch non-illuminated or illuminated - ideal for application with high transient loads - qualified for use in equipment according iec/en 60950 other versions on request - snap-in, panel thickness 1 and 3 mm - unwired versions - solder terminals - line switch with other rocker marking - for protection class ii references general product informatio n weblinks approval s , roh s , china-roh s , mating connector s , distributor-stock- chec k , accessorie s technical data ratings iec 10 a / 250 vac; 50 hz ratings ul/csa 15 a / 250 vac; 50/60 hz 1 ? dielectric strength > 2.5 kvac between l-n > 3 kvac between l/n-pe (1 min/50 hz) allowable operation temp. -25 c to 70 c degree of protection from front side ip 40 acc. to iec 60529 protection class suitable for appliances with protection class 1 acc. to iec 61140 terminal quick connect terminals 4.8 x 0.8 mm panel thickness s screw: max 6 mm mounting screw torque max 0.5 nm snap-in: 1.5/2/2.5 mm material: housing thermoplastic, black, ul 94v-0 appliance inlet c14 acc. to iec/en 60320-1, ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 10 a, protection class 1 line switch rocker switch 1 or 2 pole, non-illumina - ted or illuminated, acc. to iec 61058-1 technical detail s 1) standard version 12 a / special version 15a
power entry modules without line filter dc www.schurter.com/pg0 5 connectors dimensions screw on pcb mounting 0.1 31.2 (1.4) 34 36 r 2.5 27.2 44 r 6 r 4 3.2 0.10 0.10 6.3 32.15 2.2 27.4 4.2 +0.10 0 0 -0.2 0.1 27.5 36 m3/? 3.6 +0.2 0 r 2.5 31.5 +0.2 0 snap-in mounting 0.10 31.2 (1.4) 34 30 r 2.5 27.2 r 4 0.10 0.10 32.15 2.2 27.4 4.2 +0.10 0 27.5 +0.2 0 r 2.5 0 -0.2 31.5 +0.2 0 31.1 27 0.10 0 -0.20 31.1 27 0.10 0 -0.20 diagrams line switch non-illuminated 2-pole 1) line 2) load line switch illuminated 2-pole 1) line 2) load line switch non-illuminated 1-pole 1) line 2) load variants with internal connections rated current ul [a] panel mounting panel thickness s [mm] line switch illumination color order number 12 screw - 2-pole l red dc11.0021.001 15 screw - 2-pole l red dc11.0021.006 12 screw - 2-pole l green dc11.0031.001 12 screw - 1-pole - dc11.0001.003 15 screw - 1-pole - dc11.0001.007 12 screw - 2-pole - dc11.0001.001 15 screw - 2-pole - dc11.0001.006 12 snap-in 1.5 2-pole l red dc11.0021.201 15 snap-in 1.5 2-pole l red dc11.0021.206 12 snap-in 2 2-pole l red dc11.0021.301 12 snap-in 2.5 2-pole l red dc11.0021.401 12 snap-in 1.5 2-pole l green dc11.0031.201 12 snap-in 2 2-pole l green dc11.0031.301 12 snap-in 2.5 2-pole l green dc11.0031.401
power entry modules without line filter dc www.schurter.com/pg0 5 connectors rated current ul [a] panel mounting panel thickness s [mm] line switch illumination color order number 12 snap-in 1.5 1-pole - dc11.0001.203 15 snap-in 1.5 1-pole - dc11.0001.207 12 snap-in 2 1-pole - dc11.0001.303 12 snap-in 2.5 1-pole - dc11.0001.403 12 snap-in 1.5 2-pole - dc11.0001.201 15 snap-in 1.5 2-pole - dc11.0001.206 12 snap-in 2 2-pole - dc11.0001.301 12 snap-in 2.5 2-pole - dc11.0001.401 all variants according vde (enec 10) approved for 10 a packaging unit 50 pcs accessorie s description assorted cover s rear cover 0859.0047 4311.9403 cord retaining kit s cord retaining strain relief flat head, a 4700.0001 countersunk, b 4700.0002 mating outlets/connector s category / description appliance outlet overview complet e iec appliance outlet f, screw-on mounting, front side, solder terminal 478 7 iec appliance outlet f, snap-in mounting, front side, solder or quick-connect terminal 478 8 iec appliance outlet f or h, screw-on mounting, front side, solder, pcb or quick-connect terminal 509 1 iec appliance outlet f or h, screw-on mounting, front side, solder or quick-connect terminal 509 2 appliance outlet further types to dc1 1 connector overview complet e iec connector c15, rewireable, straight 010 1 iec connector c15a, rewireable, straight 010 2 iec connector c15a, rewireable, straight 0102- g iec connector c15a, rewireable, angled 011 2 iec connector c13, rewireable, angled 401 2 connector further types to dc1 1 ...
power entry modules without line filter dc www.schurter.com/pg0 5 connectors category / description power cord overview complet e power cord with iec connector c13, angled 031 1 power cord with iec connector c13, angled 301 1 power cord with iec connector c13, angled 301 2 power cord with iec connector c13, angled 301 3 power cord with iec connector c13 302 0 power cord further types to dc1 1 ... the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|